A D-optimal Multi-position Calibration Method for Dynamically Tuned Gyroscopes

This paper presents a novel experimental design to greatly improve the calibration accuracy of the acceleration-insensitive bias and the acceleration-sensitive bias of the dynamically tuned gyroscopes(DTGs).In order to reduce experimental cost,the D-optimal criteria with constraints are constructed.The turntable positions and the number of test points are chosen to build D-optimal experimental designs.The D-optimal experimental designs are tested by multi-position calibration experiment for tactical-grade DTGs.Test results show that,with the same cost,the fit uncertainty is reduced by about 50% by using the D-optimal 8-position experimental procedure,compared to using a defacto standard experimental procedure in ANSI/IEEE Std 813-1988.Furthermore,the new experimental procedure almost achieves optimal accuracy with only 12-position which is half the cost of the widely adopted 24-position experimental procedure for achieving optimal accuracy.     

Cooperative Routing for Maximizing Network Performance of Wireless Networks

To greatly increase spectral efficiency and improve network performance in wireless networks,a novel cooperative routing algorithm,namely maximum throughput cooperative routing(MTCR) algorithm,is proposed.According to cooperative link model,throughput analysis is presented to evaluate performance improvement in the process of exploiting cooperative commu-nication from physical layer to higher layer.Taking the throughput improvement as performance metric,a cooperative relay se-lection scheme is developed.Finally,based on the route constructed by adaptive forwarding cluster routing(AFCR) algorithm,each node on the route selects the optimum cooperative node from all the potential cooperative nodes to construct the coopera-tive link with maximum throughput so that cooperative route with maximum network throughput from source to destination can be set up.Simulation results show that compared with the noncooperative routing algorithm and minimum power selection de-code-and-forward(MPSDF) routing algorithm,the proposed algorithm can obviously improve network throughput in the pres-ence of low transmission power,large number of nodes and high spectral efficiency.     

基于均值漂移无味粒子滤波的地面运动目标变结构交互多模型跟踪(英文)

为了跟踪地面运动目标,本文提出在变结构交互多模型基础上使用均值漂移无味粒子滤波的算法。模型滤波中,通过均值漂移将无味粒子滤波产生的采样粒子向目标状态最大后验密度估计方向移动。"停止"模型基础上,提出了"遮蔽"模型:出现地形遮蔽时,使用上一时刻的预测代替下一时刻的测量,且保持道路模型与遮蔽前一致。仿真实验采用地面运动目标指示雷达,考虑地面运动目标的三种常见场景:进入或离开道路、经过道路交叉点以及无测量值。使用了RMSE和ANEES两种评价指标,实验结果表明本文算法有效地提高了目标改变行驶道路时的跟踪精度;且目标速度过低或被遮蔽时,可以避免轨迹中断。     

Improved Wavelet-based Spatial Filter of Damage Imaging Method on Composite Structures

Piezoelectric sensor array-based spatial filter technology is a new promising method presented in research area of structural health monitoring (SHM) in the recent years. To apply this method to composite structures and give the actual position of dam-age, this paper proposes a spatial filter-based damage imaging method improved by complex Shannon wavelet transform. The basic principle of spatial filter is analyzed first. Then, this paper proposes a method of using complex Shannon wavelet transform to construct analytic signals of time domain signals of PZT sensors array. The analytic signals are synthesized depending on the principle of the spatial filter to give a damage imaging in the form of angle-time. A method of converting the damage imaging to the form of angle-distance is discussed. Finally, an aircraft composite oil tank is adopted to validate the damage imaging method. The validating results show that this method can recognize angle and distance of damage successfully.     

基于格林函数法的板翅式冷板瞬态热分析(英文)

在航空电子电路设计和温度监控过程中,为保证电子元件安装部位的温度不超过允许值,需要对板翅热沉温度进行准确分析。而在发热元件为非均匀热源作用下的冷板表面温度显式解析解,可提供电子元件发热量与航空电子设备各点温升的直观了解。本文建立了板翅式冷板的三维瞬态传热模型,提出了板翅式冷板的热模拟解析求解方法,通过算例计算了板翅式冷板在非均匀热流密度下电子元件不同安装位置的瞬态温升。分析解结果与试验测量结果误差不超过3K。     

Long March Launch Vehicles Promote Quick and Sound Development of Satellite Applications

INTRODUCTION Launch vehicles are a precondition and main carrier for space activities for human beings.Their development have directly promoted the technology of satellite applications,manned spaceflight,deep space exploration,and promoted the development of communication,navigation,environmental monitoring,resource exploitation,scientific research and so on.     

第三类边界条件下管内对流换热实验方法研究

典型的管内对流换热实验均在第一、第二类边界条件下进行。本文研究了第三类边界条件下，实验装置的设计、实验数据的计算整理方法并给出了实验实例。本实验装置简单，实验参数易测并且实验关联式更易于工程应用。     

网络融合的接入网技术

本文从电信网、广播电视网和因特网三种网络的不同特点入手，说明了三网合一的必要性和可行性，重点探讨了三网合一中关键的接入网技术。     

液压仿真转台位置伺服系统频宽特性的研究

推导了带有加速度、速度、位置反馈的转台位置伺服系统的截止频率、穿越频宽、 - 1 0°相移频宽、 - 90°相移频宽的解析式 ,并就他们与参数之间的关系作了理论分析和讨论